AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Pembroke Pines Homeowners
A furnace that won’t light, won’t stay lit, or blows cold air in the middle of a cool snap can leave your home uncomfortable fast. When that happens, you want a technician who shows up, diagnoses the actual problem, and fixes it without turning it into a sales pitch. We’re Remington AC Repair, and furnace repair is one of our core services. Our technicians have up to 15 years of experience, and they work on the make you already own instead of pushing whatever brand happens to be sitting in a warehouse. We serve Pembroke Pines homeowners with honest assessments and same-day service when you need it. Call (866) 237-6150. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Furnace Maintenance
Furnace Maintenance is the preseason service call that catches small problems before they strand you on a cold morning. In Pembroke Pines, our winters are mild but the few cold stretches we get are exactly when a neglected furnace decides to act up, so a tune-up before those months pays off. We service Carrier, Trane, Lennox, Goodman, and the other major brands homeowners here actually run. A standby tune-up typically runs $80 – $200 depending on system type and access, and any repair found during that visit is quoted separately. A typical service call to address a furnace issue across the board lands somewhere in the $150 – $700 range, and the written estimate sets the final price.
What Maintenance Covers
During a maintenance visit, we inspect the burners, heat exchanger, blower, and controls, then clean and adjust what we can. We check airflow and temperature rise so the system runs the way the manufacturer intended. You get a written report of what we found and what, if anything, needs attention.
When to Schedule It
The best time is before you need the heat, ideally in the fall when schedules open up. If your system has sat unused through the summer, an inspection before the first cold night saves a lot of scrambling. If it’s already acting up, skip the tune-up and go straight to a repair call.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair
Heat Pump Repair covers the heating half of a system that handles both seasons, and in Pembroke Pines heat pumps are common because one unit does cooling and heating. When the heat side stops working, it can be a reversing valve, a defrost control, or a compressor issue, and those need a technician who understands both cycles. We diagnose the problem and tell you what it will take, working on Trane, Lennox, Goodman, Rheem, and the rest of the major brands. Repair on a heat pump typically falls in the $150 – $700 range depending on the part and the labor involved. The written estimate sets the final price, so you know before we start.
Heating Mode Not Switching
A heat pump that blows cool air in heating mode often has a reversing valve or control board issue. It’s rarely something to troubleshoot at the thermostat alone. We check the full cycle to find the real cause.
Defrost Cycle Problems
When the defrost cycle misfires, the outdoor unit can ice up and the system loses efficiency. That’s a control or sensor problem a technician needs to test. Left alone, it puts strain on the compressor.
Heating Repair
Heating Repair is the general service call for a system that’s supposed to make heat but isn’t, whether that’s an electric furnace, a heat strip, or a gas unit. You need it when the heat won’t come on, runs weakly, or cycles on and off without warming the house. We send a technician who troubleshoots the actual fault rather than guessing at parts, and we work across nine major brands so we’re not limited to one make. Our general heating work typically runs $150 – $700 depending on what’s failed and how long the fix takes. You get a free estimate up front and a written price before any work begins.
No Heat At All
A total loss of heat usually points to ignition, a failed control board, or a safety switch that’s tripped. Those parts need testing, not swapping blindly. We trace it to the source and explain what’s wrong.
Short Cycling
A furnace that starts and stops every few minutes is often overheating or fighting restricted airflow. It wears parts out fast. A technician can find the reason it’s cutting out instead of resetting it and hoping.
Boiler Repair
Boiler Repair addresses hydronic heating systems that run hot water through pipes or radiators instead of forced air. It’s a less common setup in Pembroke Pines, but plenty of homes and older builds still use one, and when a boiler fails it needs a technician who understands pressure, circulation, and ignition. We check the system end to end and give you a straight read on what’s failing. Typical boiler repair work falls in the $150 – $700 range depending on the component. The written estimate sets the final price, and the estimate itself is free.
Pressure and Circulation Issues
A boiler that runs but won’t heat the rooms usually has a circulation or pressure problem. Pumps and air in the lines are common culprits. We test instead of guessing.
Pilot and Ignition Faults
If the boiler won’t fire, the issue is often in the ignition or control system. These get tested properly before any part is replaced. We explain the fault and the fix before we touch anything.
Gas Furnace Repair
Gas Furnace Repair handles systems that burn natural gas or propane, and those need a technician who treats gas safety as the first priority. You need it when the burner won’t light, you smell gas, or the furnace shuts itself off. We service gas equipment from Carrier, Trane, Lennox, Goodman, and other major makes, and we test the burners, ignition, and safety controls as part of the diagnosis. Gas-side repair typically runs $150 – $700 depending on the fault. If you ever smell gas, leave the home first and call your gas utility, then call us. Call (866) 237-6150 for a free estimate.
Burner and Flame Problems
A weak or yellow flame can point to combustion or airflow issues that need professional attention. These are not DIY checks. We test combustion and the safety switches to confirm the cause.
Safety Controls and Sensors
The flame sensor and limit switches are there to shut the furnace down when something’s off. When they trip, the reason matters. We diagnose the underlying fault instead of just resetting the switch.
Furnace Tune Up
Furnace Tune Up is a focused service to keep an existing furnace running efficiently and catch wear early. You need one before the cold months, or if your system has gone a couple of seasons without a look. Our technicians perform a flat-price tune-up that typically runs $80 – $200 depending on the system type and access, and you get a written report of what we actually found. Our technicians aren’t paid on what they sell, so the report reflects the system, not a commission. Any repair the tune-up uncovers is quoted separately, and the written estimate sets the final price.
What Gets Checked
We inspect burners, the heat exchanger, blower components, and electrical connections, then clean and adjust what’s needed. We measure temperature rise and check airflow so the furnace runs within spec. Anything that needs a repair gets its own line on the estimate.
Flat Price, Written Report
You know the tune-up price before we start, and the report tells you what we saw. There’s no pressure to buy anything beyond what the system needs. That’s the point of a real tune-up.
Emergency Furnace Repair
Emergency Furnace Repair is for the situations that can’t wait, like a furnace that quits on the coldest night the area sees or a gas smell that won’t go away. In Pembroke Pines, a failed furnace can be more than uncomfortable, especially in a home with young kids or older family members. When you call, we answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Emergency-priority calls get scheduled into the next opening, and the price stays the same as a standard repair, set per job by the written estimate, typically in the $150 – $700 range. No surcharge or premium for the timing.
Furnace Down and No Backup
When the furnace is your only heat and it’s cold, getting it back up quickly matters. We’ll walk through the fastest path to a fix. Call us and we’ll get a technician scheduled.
Gas Smells and Safety Trips
If you smell gas, leave the building and call your gas utility before anyone else. Once you’re safe, call us to have the furnace inspected. Safety first, repair second.
Brands We Service
We service Trane equipment and know where those systems tend to wear out, from the igniter to the control board. We also work on Lennox furnaces, and we’re familiar with the diagnostic patterns those units show when a part is starting to fail. If your system is a Goodman, we handle it the same way, and Rheem is in our lineup too.
Altogether we’re certified to work on nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We’re not a single-brand dealer, so our recommendations come from what your home needs, not what’s in the inventory. Whether you have Carter or any other make, we can help. Call (866) 237-6150 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- You smell gas. A gas odor near your furnace is a safety issue. Leave the home, call your gas utility, then call us for an inspection. Don’t try to find the leak yourself.
- The furnace won’t stay lit. A burner that lights and then goes out is often a flame sensor or gas valve issue. That’s a control-system fault a technician needs to test.
- Cold air from the vents. If the blower runs but the air is cold, the heat source isn’t igniting or the control is misfiring. It won’t fix itself.
- Wailing or banging noises. Strange sounds usually point to a failing blower or airflow restriction. It’s worth a quick check before it becomes a bigger repair.
- Yellow or wavering flame. A healthy flame is steady and blue. A weak yellow flame can signal a combustion problem that needs professional attention.
Our Process, Step by Step
- 1
We take your call and listen. Whether it’s an emergency or a routine issue, we gather the details so the right technician and tools go out. If your question is about the bigger picture, our Remington AC Repair page has the overview.
- 2
We diagnose on site. Technicians use combustion analyzers, multimeters, and airflow instruments to find the actual cause instead of guessing at parts. The goal is one visit, one accurate answer.
- 3
We quote a written price. You get the fix and the number before any work starts, and the estimate is free. No surprise add-ons once we’re under the hood.
- 4
We do the repair. If a part is beyond economical repair, we’ll tell you straight, and we can handle furnace repair or plan a full replacement if that’s the smarter call.
- 5
We confirm the fix. Once the work is done, we run the system to make sure it heats the way it should, and we walk you through what we found. That’s the check we want on our own work.
How Much Does Furnace Repair Cost in Pembroke Pines?
Furnace repair in Pembroke Pines typically runs $150 – $700 depending on the fault, the part, and the system type. A simple ignition or flame sensor fix tends to land near the lower end, while a blower motor, control board, or heat exchanger issue will push toward the upper end. A common scenario: a gas furnace that won’t stay lit often falls in the $150 – $400 range, while a blower replacement or control board swap can run $400 – $700. A furnace tune-up is its own line item at $80 – $200, and a full system replacement, if repair stops making sense, is a bigger project quoted separately. AC installation and furnace repair on the cooling side of the system are separate service ranges.
Several things move the price: the make and model of the furnace, how accessible it is, and which parts have failed. A technician spending time properly diagnosing saves you money because the first fix is the right one. To avoid overpaying, always ask for the written estimate before work starts, and ask what’s included. Our free estimate spells out the diagnosis, the part, and the labor, and the written estimate sets the final price. You’ll never be asked to approve a blank check.
Our Service Area Near Pembroke Pines
We serve Pembroke Pines and the surrounding communities, including Watergate, Southwest Ranches, Cooper City, Country Club, Palm Springs North, Weston, Plantation, Broadview Park, and Pembroke Park. Dispatch timing depends on where you are and how the day fills up, so call and we’ll give you the soonest opening. Our furnace repair page covers one nearby community in detail. Wherever you are in this corner of Broward, there’s a technician who can reach you.
Serving Pembroke Pines, FL – Our Local Coverage Area
We serve Pembroke Pines and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Pembroke Pines
Furnace repair is the service that diagnoses and fixes a heating system that isn’t working as it should, from ignition problems to failed parts. It’s the call you make when your furnace won’t heat, won’t stay lit, or acts differently than before. A technician inspects the unit, tests the components, and repairs the fault. Call (866) 237-6150 for a free estimate.
Most furnace repairs are done in a single visit, often within a couple of hours once the technician is on site. The exact time depends on the fault and whether a part is needed. If a specialty part has to be ordered, we’ll tell you the timeline up front. Call (866) 237-6150 and we’ll give you the soonest opening.
Typical furnace repair in Pembroke Pines runs $150 – $700 depending on the fault and the parts involved. A tune-up is a separate line item at $80 – $200. The free written estimate sets the final price before any work begins. Call (866) 237-6150 for an exact quote.
We’re certified to work on nine major brands, including Carrier, Trane, Lennox, Goodman, and Rheem. That covers the vast majority of residential systems in this market. If you’re unsure whether we cover your make, call us and we’ll confirm. Call (866) 237-6150 for a free estimate.
Same-day service is available depending on the schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours gets booked into the next opening. Call (866) 237-6150 to check availability.
Warranty terms depend on the part and the manufacturer, and we’ll spell those out on your written estimate. We don’t state a blanket warranty because it varies by job. Ask the technician and they’ll explain exactly what’s covered. Call (866) 237-6150 to ask before we start.
Clear a path to the furnace so the technician can reach it easily. Note any unusual sounds, smells, or error codes you’ve seen, and have the model and serial numbers handy if you can find them. Leave the thermostat set as it normally is. Call (866) 237-6150 to schedule your visit.
Schedule Your Furnace Repair Service in Pembroke Pines Today
When your furnace isn’t working, you want a technician who diagnoses it right and quotes a written price before starting. We’re Remington AC Repair, and we handle furnace repair and furnace repair across Pembroke Pines with free estimates and brand-agnostic expertise. Call (866) 237-6150. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimate, straight answers on your system.
Written by the team at Remington AC Repair.