Heat Pump Installation Cost in Pembroke Pines - What It Actually Costs, Quoted Free

Real local price ranges for repair and for replacement, then a free written quote for your home. Rebates and financing options laid out with the numbers, not after you sign.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 237-6150

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate
Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your HVAC?Free estimate, price agreed before work starts
Call (866) 237-6150

How Much Does Heat Pump Installation Cost in Pembroke Pines?

Heat pump installation in Pembroke Pines typically costs between $3,500 and $7,500 for a complete replacement system, with most single-family homes landing in the $5,000 to $6,500 range once the air handler, outdoor unit, and thermostat are included. A straightforward swap using existing ductwork sits at the low end; a system that needs new line sets, electrical work, or a larger tonnage pushes toward the top. The written estimate we provide after seeing your home is what sets the final price.

If you’re replacing an aging AC and want one system that handles both cooling and heating, a heat pump is the usual answer in South Florida. It cools the way your current unit does and reverses to heat on the handful of chilly mornings Pembroke Pines gets each winter. Call (866) 237-6150 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Key Takeaways

  • Most heat pump installations in Pembroke Pines run $3,500 – $7,500, with a typical single-family job near $5,000 – $6,500.
  • Heat pumps cost more upfront than a straight AC swap, but they replace both your cooling and heating equipment with one system.
  • Ductwork condition, electrical capacity, and tonnage are the three biggest price drivers in this market.
  • Our technicians have up to 15 years of experience and are certified on nine major brands, so the recommendation fits your home rather than a single product line.
  • Estimates are free, and the written estimate sets the final price.

Heat Pump Installation Cost Breakdown (2026)

Here’s how the pieces of a heat pump installation break down for a typical Pembroke Pines home. These are estimated ranges for planning; every home is different, and the written estimate locks in your number.

Line Item Typical Estimated Range
Complete heat pump system installation (equipment, labor, startup) $3,500 – $7,500
Heat pump replacement using existing ductwork (smaller system) $3,500 – $5,200
Heat pump replacement with new air handler and thermostat $5,000 – $6,800
Larger-tonnage system for a big or multi-zone home $6,500 – $7,500
AC repair (for comparison, when repair still makes sense) $150 – $650
Furnace repair (if you keep a separate heating system) $150 – $700
Standard AC installation (cooling only, for comparison) $3,500 – $7,500
Seasonal tune-up (recommended after install and each year) $80 – $200

What pushes a heat pump installation toward the top of that range and what keeps it low: ductwork is the biggest wildcard. Homes with tight, well-sealed ducts and a correctly sized return usually land near the bottom. Homes where the attic ducts are undersized, leaking, or crushed in a tight space need work before a new system performs, and that adds to the job. Electrical capacity matters too. A heat pump draws different amperage than an old AC, and if the panel or disconnect needs upgrading, that’s part of the estimate. The equipment itself varies by brand and efficiency tier, and we work with Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so there’s a fit at every budget level without one brand being favored over another.

Want to talk it through?Free estimate, price agreed before work starts
Call (866) 237-6150

What Affects Heat Pump Installation Pricing in Pembroke Pines

  • Home size and tonnage. A 1,400-square-foot townhome in Chapel Trail and a 3,500-square-foot house in Silver Lakes don’t take the same system. Tonnage drives equipment cost, and sizing is done with a load calculation, not a guess based on the old unit.
  • Ductwork condition. Much of Pembroke Pines was built between the 1980s and 2000s, and attic ducts in those homes have had decades of heat and humidity working on them. If the ducts are deteriorated, the new heat pump won’t hit its rated efficiency until they’re addressed, and that’s factored into the estimate.
  • Electrical and disconnect work. A heat pump’s outdoor unit may need a different breaker size or disconnect than the AC it replaces. Panel capacity and wire runs get checked at the estimate, and any needed electrical work is quoted upfront rather than discovered mid-job.
  • Line set length and routing. Reusing the existing refrigerant lines is common and keeps cost down. When the lines are the wrong size or need rerouting through a finished wall or a tight attic path in a neighborhood like Pembroke Falls or Grand Palms, labor goes up.
  • Equipment tier and brand. Standard single-stage heat pumps sit at the low end; variable-speed, higher-efficiency systems sit higher. Because we install nine major brands and don’t stock a single product line, the recommendation follows your budget and your home, not an inventory quota.
  • Thermostat and controls. A basic programmable thermostat is inexpensive to include. If you want a heat pump-specific smart thermostat that handles changeover and defrost properly, that adds a line to the estimate.

The local climate itself changes the calculation in one important way. Pembroke Pines runs the cooling side of a heat pump hard for most of the year, so a system that’s correctly sized and paired with tight ducts matters more here than the heating performance. The heating side gets used lightly, usually on the few cold mornings in January and February. That’s why we spend time on the load calculation and the duct check rather than defaulting to the same size unit that came out. Our team handles this full-cycle work – cooling and heating together – so you’re not calling one company for the AC and another for the heat.

How to Save on Heat Pump Installation

There’s no way around the fact that a heat pump costs more than a straight AC replacement. But there are real ways to keep the number down without cutting corners.

  • Reuse good ductwork. If your ducts are sealed and sized correctly, reusing them removes a large line item. Have them checked before you commit.
  • Get a load calculation, not a guess. An oversized system short-cycles, runs less efficiently, and wears out sooner. Correct sizing is the cheapest efficiency upgrade there is.
  • Compare equipment tiers honestly. A standard-efficiency heat pump from any of the nine brands we install will cool and heat a Pembroke Pines home well. Higher-efficiency systems cost more upfront and pay back over years; the estimate should show you both.
  • Bundle the tune-up. A post-install tune-up in the $80 – $200 range keeps the system at its rated performance and catches small issues before they’re repairs.
  • Fix what’s fixable first. If your existing system needs only a repair in the $150 – $650 range and it’s otherwise sound, replacement can wait. We’ll tell you straight if that’s the case.

Start with a free estimate. Call (866) 237-6150. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the final price, and there’s no pressure to buy on the spot. If you’d like to see how we approach the full range of work, start with Remington AC Repair, and for local context, our Pembroke Pines page covers the neighborhoods we serve.

Need a price for your HVAC?Free estimate, price agreed before work starts
Call (866) 237-6150

Heat Pump vs. AC Plus Furnace: Which Costs Less in Pembroke Pines?

Over ten years, a heat pump is usually the lower total cost in Pembroke Pines because one system replaces two. A heat pump handles cooling the same way an AC does and provides heating by reversing the refrigerant cycle, so you don’t maintain a separate furnace. A straight AC installation runs $3,500 – $7,500, the same range as a heat pump, and if your home also needs a furnace, that’s a second system with its own repair bills in the $150 – $700 range. For most South Florida homes, the heat pump is the simpler and more economical choice. Where an AC plus furnace still makes sense is a home with existing gas or electric resistance heat that’s working fine and a cooling system that’s the only thing failing.

When Is Replacement Cheaper Than Repair?

Replacement usually wins when a repair would cost more than roughly a third of a new system’s price and the equipment is old. A repair in the $150 – $650 range on a system that’s otherwise healthy is almost always worth doing. Once you’re facing a compressor or reversing valve failure on aging equipment, or repeated repairs in the same season, the math shifts toward replacement. Our technicians will give you the honest comparison, including what a heat pump installation would cost for your home, so you can decide with numbers instead of a sales pitch. That’s the “right repair or honest replacement” approach we take on every call.

How Long Does a Heat Pump Installation Take?

A typical residential heat pump installation in Pembroke Pines takes one to two days. A straight replacement using existing ductwork and electrical often finishes in a single day. Jobs that include ductwork changes, electrical upgrades, or line set rerouting stretch to two days or occasionally more. We schedule the work so the system is running before we leave, with a startup and performance check at the end. If you need same-day service for a failing system while you decide on replacement, call and we’ll get a technician out.

Do You Work on My Brand?

Very likely yes. We’re certified to install and service nine of the industry’s most widely installed brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That covers the vast majority of residential systems in Pembroke Pines, which means a technician can diagnose and service what’s already in your home without steering you toward a brand for inventory reasons. When it’s time to install, the recommendation is based on your home’s load, your budget, and how you use the system.

What Should I Check Before Booking a Heat Pump Installation?

Ask for a room-by-room load calculation, a written scope that lists equipment model numbers and any duct or electrical work, and a clear statement of what’s included in the startup and testing. Confirm the technician is licensed and insured. Ask whether the old equipment removal and disposal is covered. A good estimate answers all of these in writing. Ours does, and it’s free.

Questions about your HVAC?Free estimate, price agreed before work starts
Call (866) 237-6150

FAQs – Heat Pump Installation Cost

How much does heat pump installation cost in Pembroke Pines?

Heat pump installation in Pembroke Pines typically costs $3,500 to $7,500, with most single-family homes falling around $5,000 to $6,500. The written estimate sets the final price. Call (866) 237-6150 for an exact quote – estimates are free.

Is a heat pump cheaper to install than an AC and furnace?

A heat pump is usually less expensive than installing a separate AC and furnace because it’s one system instead of two. AC installation alone runs $3,500 – $7,500 in Pembroke Pines, and a heat pump lands in the same range while covering heating too. Call (866) 237-6150 to price both options for your home.

How much does the top heat pump problem cost to fix in Pembroke Pines?

Most heat pump repairs fall in the $150 – $650 range, with some jobs reaching $700 depending on the part. Common issues are a failed reversing valve, a bad defrost board, or a capacitor, and each has its own price. Call (866) 237-6150 for a free estimate on the exact repair.

Can you install a heat pump the same day?

Same-day service is available for diagnostics and repairs. A full heat pump installation is typically scheduled and takes one to two days. If your system has failed, call (866) 237-6150 and we’ll get a technician out to assess it. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Is it cheaper to repair or replace my heat pump in Pembroke Pines?

Repair is cheaper when the fix is in the $150 – $650 range and the system is otherwise sound; replacement wins when repairs would cost a large share of a new system’s price on aging equipment. A $3,500 – $7,500 replacement only makes sense when the old unit is near the end of its life. Call (866) 237-6150 for an honest repair-or-replace comparison – the estimate is free.

Book Your Free Heat Pump Estimate

A heat pump installation is a big-ticket decision, and the number should come with a clear explanation, not a hard sell. We size the system to your home, check the ducts and electrical, and give you a written estimate that sets the final price. Call (866) 237-6150 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Heating and cooling handled by one team, with straight answers on your system.

Pricing reflects the Pembroke Pines market as of 2026. Remington AC Repair offers free estimates – call (866) 237-6150.

Written by the team at Remington AC Repair.

What Our Customers Say

★★★★★ 4.7 from 11+ reviews

"Thermostat had been miswired by whoever installed it, which is why the heat strips were running with the AC. He found it in a few minutes and probably saved me a fortune on the next few electric bills."

- Alejandro Garcia

"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."

- Robert Novak

"Fixed the immediate issue and was honest that the unit is old enough that I should be saving for a replacement. Slightly more expensive than I hoped but he was upfront before starting."

- Dana Thompson
Need HVAC help in Pembroke Pines? Licensed & insured · within the hour response · free estimates
Call (866) 237-6150

Request a Free Estimate

Tell us what's going on in Pembroke Pines. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7